M-Audio BX Subwoofer Premium Active 10″ Studio Subwoofer

M-Audio BX Subwoofer Premium Active 10″ Studio Subwoofer

The BX Subwoofer delivers deep, accurate bass response down to the lowest audible frequencies, picking up where your left/right studio monitors leave off. Recording professionals know that hearing the extreme low frequencies in music is essential for making accurate mixing adjustments and producing the best recordings. The BX Subwoofer easily fulfills this requirement in a powerful and compact package that won’t take up too much of your valuable studio space.

Features

• 10” long-excursion low-frequency driver with oversized magnet
• 240-watt Class A/B amplifier with all-discrete transistor design
• Stereo inputs: XLR; 1/4″ balanced/unbalanced; RCA
• Stereo satellite outputs: XLR; 1/4″ balanced/unbalanced
• Internal crossover offers variable frequency
• Included subwoofer bypass footswitch
• High-density bass reflex cabinet with internal bracing
• Removable grill and detachable feet
• 180 phase reverse switch

Specifications

• Type: Bass-reflex active powered subwoofer
• Woofer Driver: 10-inch composite (treated paper/fiberglass) cone with high-temperature voice coil and damped rubber surround
• Frequency Response: 20-200Hz (-3dB)
• Crossover: HP/LP linked filter sweepable from 50-200Hz; 24dB/octave 4th-order alignment
• Input Sensitivity: 80mV pink noise input produces 100dBA output SPL at one meter with vol
• Adjustable Gain: (-30dB to +6dB)
• Amplifier: 240 watts average power into 4, discrete transistor design
• Signal-To-Noise Ratio: 96dB (A-weighted)
• THD at Rated Power, Mono Mode: 0.019%
• Inputs: Two XLR balanced/unbalanced inputs; two TRS balanced/unbalanced inputs; two unbalanced RCA
• Outputs: Two XLR balanced/unbalanced outputs for satellites; two TRS balanced/unbalanced outputs for satellites
• Controls: Volume/gain control, phase inverse switch, variable crossover control, subwoofer bypass footswitch jack
• Input Impedance: 20k ohms balanced, 10k ohms unbalanced
• Maximum Input Level: +20dBU
• Protection: Over temperature, turn-on/off transient, subsonic filter, external mains fuse, DC protection, over current protection
• Indicator: Power on (blue) or standby/bypass (red)
• Power Requirements: Dual-voltage (selectable by rear-panel switch) for either 100-120V/~50/60Hz or 220-240V/~50/60Hz; powered via detachable grounded IEC cable
• Cabinet: Vinyl-laminated high-density internally braced 3/4” MDF cabinet with 1” front and back baffles
• Dimensions: 15.5 in. (h) x 13 in. (w) x 17.25 in. (d); 39.4 cm (h) x 33 cm (w) x 43.8 cm (d)
• Shipping Weight: 54.6 lbs.; 24.75 kg