MarkBass Big Bang 500 Watts Bass Head MBH110034

MarkBass Big Bang 500 Watts Bass Head MBH110034

500W@4ohm / 300W@8ohm ; solid state preamp – aux in – headphone out with level control, mute and VLE and VPF filters with footswitch control

Just over a decade ago, Marco De Virgiliis started pioneering small, lightweight amps; the Markbass Little Mark heads started a new era in bass amplification, inspiring many other companies to follow their lead.

Now, you’ll be amazed that such a warm, rich and “explosive” sound comes from an amp smaller than our groundbreaking Little Mark heads! And—despite its small size—the Big Bang is packed with extra features that customers have been asking for: aux in, headphone output with level control, plus mute and VLE and VPF filters with footswitch control. Other features, already appreciated by Little Mark users, include a simple and effective 4-band EQ, effects loop, and level control and pre/post EQ switch for the XLR DI output.

INPUTS
INPUT – impedance 2 Mohm, max. voltage 15 Vpp
AUX IN
EFFECT RETURN  – impedance 33 Kohm, max. voltage 10 Vpp

CONTROLS
GAIN
MASTER VOLUME
LINE OUT LEVEL
HEADPHONE LEVEL CONTROL
GROUND LIFT – switch on rear panel
PRE/POST EQ – switch on rear panel
MUTE – footswitch

EQUALIZATION
LOW – center frequency: 40 Hz; level: ±16 dB
LOW MID – center frequency: 360 Hz, level: ±16 dB
HIGH MID – center frequency: 800 Hz, level: ±16 dB
HIGH – center frequency: 10 kHz, level: ±16 dB

FILTER SECTION (with footswitch)
VPF (Variable Pre-shape Filter) center frequency 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator) frequency range 250 Hz-20 kHz (cut)

OUTPUT
LINE OUT  – balanced XLR, max. voltage 20 Vpp
EFFECT SEND – unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT – unbalanced, max. voltage 2 Vpp
SPEAKER OUT – speakon/1/4″ combo, 1/4″
HEADPHONE OUT

OTHER
WEIGHT – 4.74 lbs / 2.15 kg
DEPTH – 10.04 in. / 25.5 cm
WIDTH – 8.94 in. / 22.7 cm
HEIGHT – 2.56 in. / 6.5 cm
OUTPUT POWER – 300W RMS @ 8 ohm, 500W RMS @ 4 ohm
POWER REQUIREMENT – 100/120V; 230V; 240V -50/60Hz
(Voltage is factory preset according to region of sale)

NOTES:
Minimum ohm load for all Markbass heads is 4 ohms.

Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage.
Due to homologation issues, the voltage may not be changed.

Rack ears do not come included with this head.

Product specifications are subject to change without notice