Adam Audio Sub12 200 Watts Active Studio Subwoofer 1×12 inch Driver Black

Adam Audio Sub12 200 Watts Active Studio Subwoofer 1×12 inch Driver Black

ADAM Audio Sub12
The Sub12 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 22 Hz.

A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed.

The Sub12 subwoofer provides a precise combination of low cutoff frequency (-3dB at 22Hz) and an undistorted high sound pressure level (115dB SPL at 1m).

Technical Data
View the specifications of the ADAM Audio Sub12 by clicking each drop-down section.

General Data
Panel: Rear
Weight: 57.3 lb (26 kg)
Height x Width x Depth: 23.5″ (600 mm) x 14″ (360 mm) x 17.5″ (450 mm)
Warranty: 5 years (2 years warranty plus 3 years optional with product registration)
Delivery Contents: Power cord, manual

Audio Input Connectors
Analog: XLR /RCA
Input Impedance: 10 kOhm

Amplification
Type: PWM
Amp. Power RMS / Music: 200 W / 300 W

Acoustics
Frequency Response: 22 Hz – 150 Hz
THD > 60 Hz: ≤1 %
Max. peak SPL at 1 m: ≥115 dB
Crossover Frequencies: 50 – 150 Hz

Driver
Basket Diameter: 12″
Voice Coil Diameter: 2″ (50 mm)
Cone Material: Paper

ADAM Audio Sub12 Active Studio Subwoofer Features:
Linear bass reproduction down to 22Hz
Maximum Peak sound pressure in 1 m ≥ 115dB
High-efficiency 200W PWM amplifier
Special 12″ woofer with paper diaphragm
Easy manual or automatic (de-)activation
Upper cutoff frequency is selectable between 50Hz and 150Hz
Switchable highpass filter for satellite outputs, rolls off signal below 85Hz
Analog XLR and RCA inputs
2-year warranty; optional extension to 3 years upon product registration